Roaster attachments
Destoner, External Cyclone, Green Coffee Conveyor, SFE filter, Catalytic Cleaning System (CEC30/CEC60), Silo's, Mixer
This alarm means that the Temperature Sensor is broken or not properly connected. If you get this alarm on the CEC, press de triangle located at the back right of the screen. But it can also mean that the sensor was hot and you turned the machine off and then on again. If, when the machine is turned on, the sensor is hot above 75 degrees, you also get this error
You will need adjust first the nut on the tray, once you ensured then you will need to look in to the regulator the right speed that you would like the sucking of the coffee beans. Normally should be use it around 35-37Hz on the regulator. But all depends weight of the cooffee beans.
\uD83E\uDD14 Probleem The setting number is change by itself. \uD83C\uDF31 Oplossing You can set the parameter on the arrows on your screen: · Press 'DSP/FUN' · Go with the arrow to 'F11' · Press READ/ENTER · Change the setting with the arrow to '0' · Press READ/ENTER Press 'DSP/FUN' Now you can change the frequency with the arrows. When you want to change